• Home
  • Sneak Peek
  • Project Shop
  • About
  • Contact
  • FAQ
Sew-What-Box
0

Sneak Peek→

Project Shop→

Log in→

Adilee's Bag

BLURB HERE

 

Scroll to the bottom of the page to find and use the downloadable PDF pattern.

Video Tutorial:

7323-r5zGrlMwLxk.jpg

Written Directions:

NOTE: Seam allowances are 1/2-inch unless otherwise stated.


Pockets:

1. Working with one piece C, fold top short edge toward the wrong side of the fabric 1/2-inch and press to hold fold. Repeat with same edge to encase raw edge inside.
2. Topstitch close to first fold in order to hold folds in place, encasing raw edge inside.
3. Place wrong side of sewn piece C on coordinating right side of piece B, aligning unsewn short edge with bottom short edge of piece B. Pin along three unsewn edges and treat this as one piece.
4. Repeat steps 1-3 with remaining piece C.
5. Set aside until step 16.


Handles:
6. Working with one piece D, fold one long edge toward the wrong side of the fabric 1/2-inch and press to hold fold. Repeat with second long edge.
7. Fold in half, matching long edges with each other, along the folds. The raw edges should be nicely tucked into the inside of the folded strap. Press to hold.
8. On one short end, unfold all folds and fold short end in half with right sides of fabric facing and raw edges lined up. Sew together along short end, reverse-stitching at beginning and end.
9. Turn right side out along short sewn end. Fold the long raw edges back inside of the piece and smooth flat. Press to hold.
10. Repeat steps 8-9 with the other short end.
11. Topstitch along both long edges, starting and stopping at the same short end each time to reduce fabric twisting.
12. Repeat steps 6-11 with remaining piece D.
13. Set aside until step 27.


Bag Body:
14. Working with a matching pair of pieces A, arrange so the bottom short edge of the pieces are aligned, with right sides of fabric facing. Pin along bottom short end.
15. Sew along pined edge, reverse stitching at beginning and end. Press seam open.
16. Find the center of the bottom short end of one coordinating piece B and pin to long edge of sewn pieces A so center mark is matched to seamline on piece A and right sides of fabric are facing. Pin the rest of this short edge in place along the side of piece A.
17. Pin each side of piece B to the rest of the length of piece A that is on either side of the base of piece B, right sides of fabric still facing. Far corners of this edge of piece A should match top corners of piece B, and diagonal folds in piece A at the bottom corners of piece B will occur.
18. Sew around the three pinned edges, reverse stitching at beginning and end. For ease of manipulation, ensure that piece B is closest to the bottom of the sewing machine when sewing and keep corner fabric folds out of the way while sewing each edge--pivoting around each corner and moving folded fabric out of the way at the same time.
19. Repeat steps 16-18 with second coordinating piece B and opposite long edge of sewn piece A.
20. Repeat steps 14-19 with pieces A and pieces B of the other color.


Bag Assembly:
21. Ensure one bag piece is inside out and one is right-side out.
22. Place the right-side out bag inside the inside out bag and align top raw edges, matching all side seamlines with each other. Pin together, around this entire top edge.
23. Sew around pinned edge, leaving a 4 inch hole between side seams. Reverse stitch at beginning and end.
24. Turn entire project right-side out through the hole left in step 23. Push the desired lining fabric inside the other fabric.
25. Press top edge of bag flat, pulling seamline out to the edge of the fold. 
26. Turn raw edges into hole left in step 23 about 1/2 inch and press. Close so that folded edges match each other and pin to hold in place.
27. Working with one sewn handle, place one end on outside top edge of bag 2 1/2 inches from side seam and 1 1/2 inches down from top edge of bag. Pin in place, perpendicular to top edge of bag.
28. Taking care to not twist handle, place opposite sewn end on outside top edge of bag 2 1/2 inches from the opposite side seam on the same side of the bag and 1 1/2 inches down from top edge of bag. Pin in place, perpendicular to top edge of bag.
29. Repeat steps 27-28 with the second sewn handle piece on the opposite side of the bag.
30. Topstitch around the entire top edge of the bag and across the handle ends to attach handles and close hole from step 23.
31. Thread one D-ring onto each short handle end, then topstitch along the very end of each handle to hold the end of the handle and the D-ring in place. Reverse stitch at beginning and end of each small stitch line.

Project PDF Pattern

Want a PDF pattern for this project? Click the button, below, to download the pattern and make even more--out of any fabric color you like!

Get the Pattern

New to using our PDF patterns? Learn how to assemble and use the downloadable pattern by clicking here.

Get Started

  • Subscribe
  • Sneak Peek
  • Project Shop

Help

  • FAQ
  • Contact

More

  • About
  • Privacy Policy
  • Terms and Conditions
573-logowhite-1694820416767.png

Copyrights © All Rights Reserved By Sew What Box